Virendra Haribhai Pansara

An N95 mask or N95 respirator is a particulate-filtering facepiece respirator that meets the U.S. National Institute for Occupational Safety and Health (NIOSH) N95 classification of air filtration, meaning that it filters at least 95% of airborne particles. This standard does not require that the respirator be resistant to oil; another standard, P95, adds that requirement. The N95 type is the most common particulate-filtering face piece respirator. It is an example of a mechanical filter respirator, which provides protection against particulates but not against gases or vapors.

N95 respirators are considered functionally equivalent to certain respirators regulated under non-U.S. jurisdictions, such as FFP2 respirators of the European Union and KN95 respirators of China. However, slightly different criteria are used to certify their performance, such as the filter efficiency, test agent and flow rate, and permissible pressure drop.

The N95 mask requires a fine mesh of synthetic polymer fibers, specifically a non woven polypropylene fabric. It is produced by melt blowing and forms the inner filtration layer that filters out hazardous particles.

Important properties of sanitary napkins:

  No Leakage,

  No unaesthetic appearance or color,

  No odour,

  No noise,

  Stay in place,

  Comfortable to wear,

  Hygienic  

Types of Sanitary Napkins:
There are 3 major types of products, 

(a)Thick sanitary napkins; 

(b) Ultra thin sanitary napkins and 

(c) Panty liners being used in the market. 

The size of each and their content vary from market to market.

Raw Material of Sanitary Napkins:
Materials used in absorbent hygiene products:

  Nonwoven

  Pulp

  Super absorbent

 Plastic film

  Elastic materials

  Fastening devices

  Packaging

Specification of the Raw Material of the Sanitary Napkins:

1.     Pulp : fluff pulp ,thickness 1-2mm, width 280-410mm(500gmm2 up)

2.     Tissue: so called tissue 18gm/square meter standard width 180mm

3.     P.E. Film: the thickness 0.0015mm, width 85-105mm

4.     Non-woven fabric: good thermo-bonding 16-18gm/square meter, standard width:175-180mm

5.     Hot melt gum: it is pressure sensitive and endurance ,good stickiness,white solid adhesive.

6.     Release paper: good release, width 19-50mm(standard)

• Weight: 10 - 150 gsm

• Width: Max 1600 mm (can be slit)

• Fabric Roll Length: As per buyers need ( 200 - 1200 Mtr)

• Color: various colors available.

• Procedure of production: Spun bonded Non Woven, Diamond design

• Material: polypropylene

• Minimum Order: 1000 Kg

• Sample: sample free, freight collect

• Weight: 10 - 150 gsm

• Width: Max 1600 mm (can be slit)

• Fabric Roll Length: As per buyers need ( 200 - 1200 Mtr)

• Color: various colors available.

• Procedure of production: Spun bonded Non Woven, Diamond design

• Material: polypropylene

• Minimum Order: 1000 Kg

• Sample: sample free, freight collect

30/kg cnf price

product info

1. By electret treatment, the melt-blown nonwovens produced by huayan new material have better adsorption effect on viruses, bacteria and particulate matter in the air than ordinary melt-blown nonwovens, effectively block the spread of viruses, bacteria and other harmful substances in the air, and have better protection performance.

2. The melt-blown nonwoven products have been tested by qualified third-party inspection institutions, and the test results show that the product performance meets the key performance index requirements of raw materials in the national mask standards.

3. Melt-blown nonwoven products can be used to produce n95 protective masks, medical surgical masks, disposable medical masks, ordinary civilian masks and other epidemic protection products

PRODUCT INFO

1. By electret treatment, the melt-blown nonwovens produced by Huayan New Material have better adsorption effect on viruses, bacteria and particulate matter in the air than ordinary melt-blown nonwovens, effectively block the spread of viruses, bacteria and other harmful substances in the air, and have better protection performance.

2. The melt-blown nonwoven products have been tested by qualified third-party inspection institutions, and the test results show that the product performance meets the key performance index requirements of raw materials in the national mask standards.

3. Melt-blown nonwoven products can be used to produce N95 protective masks, medical surgical masks, disposable medical masks, ordinary civilian masks and other epidemic protection products